We help you with all your needs concerning testing and certification of cables. This makes us to your ideal partner to guide you through the entire testing and certification process.

We have a new cutting edge facility for high voltage testing and deliver approvals within a large number of fields as well as compulsory fire safety CE-certification. We take active part in national Swedish as well as international standardization, enabling us to use novel test methods immediately after publication.


High voltage cables  
High voltage cables are complex constructions that with today’s voltages and applications are exposed to tremendous stresses and harsh handling and environments. Furthermore, the applications they serve often require extreme reliability in combination with low losses and low environmental impact. Altogether it has become increasingly important to be able to verify the properties of cable systems before it is deployed in application.  
A cable includes a conductor and insulation, and is suitable for being run underground or underwater. High-voltage cables of differing types have a variety of applications in instruments, ignition systems, and AC and DC power transmission. Regardless of the applications, the insulation of the cable must not deteriorate due
to high-voltage stress, ozone produced by electric discharges in air, or tracking. The cable system must prevent contact of the high-voltage conductor with other objects or persons, and must contain and control leakage current. Cable joints and terminals must be designed to match the practics of the cable.


Testing of high-voltage cables
There are different causes for faulty cable insulations. Hence, there are various test and measurement methods to prove fully functional cables or to detect faulty ones. One needs to distinguish between cable testing and cable diagnostics. While cable testing methods result in a go/no go statement, cable diagnostic methods allow
determination of the cables current condition. In some cases it is even possible to locate the position of the fault in the insulation.
We have unique testing facilities and methods to perform various electrical tests on AC and DC transmission cables, cable systems or cable accessories based on our test facilities and our state-of-art measuring systems.

Cable Shield Measurement

We have recently started a new domain where we have seen an increased demand from industries for cable and connector shielding measurement. We can assist with
transfer impedance testing according to standard IEC 62153-4-3 and IEC 62153-4-4.

Cable fire testing  
Fire properties of cables are of great importance in a fire safety perspective. Therefore cables have been included in the classification system under the European Construction Products Regulation (CPR). We were responsible for proposing the classification system to the European Commission. The European CEMAC project (CE-Marking of Cables), for which RISE Fire Research has provided technical management, has recently been concluded. In order to obtain a CE-mark the manufacturers would have to test their cables in accordance with EN 50399 and EN 60332-1-2, and then get a classification report in accordance with EN 13501-6. We can assist you by grouping cables in product families in accordance with the EXAP standard EN 50576. This will considerably reduce the amount of tests needed.  

We can guide you through the European system and assist you in obtaining the maximum amount of products approved based on a minimum number of tests.

The harmonized product standard EN50575 for Power, control and communication cables is  published. CE marking has come into force and CE marking of cables is possible. From July 1st, 2017 CE marking is mandatory.

In addition we also test cables for fire resistance, rolling stock
applications (in accordance with EN 45545-2), shipping applications (in accordance with IMO-International Maritime Organization) as well as cable penetration systems. We also offer tools for modelling test results as part of the development process.


Advanced materials and structural engineering for mechanical performance of cables.
With higher energy demands and increased need for connectivity in a globalized world, material, electric and mechanical performance becomes of high interest to the cable manufacturer. Developing energy distribution solutions for dynamic loads in a harsh environment requires the cutting edge expertise and technology. Being a third party technical research institute, we have a strong capability and track record of providing a complete and cost effective solution in this area.

In the area of advanced materials and mechanical engineering,
we offer services that are supported by active research and large scale test facilities and thereby providing the industry with a strong capability for verifying cable performance to the industry.

Our test facility in Borås is a unique resource for multidisciplinary evaluation of cable structures. From a mechanical point of view, tensile testing is crucial in order to understand the performance both from a static and dynamic point of view. For
large scale structures the test facility is equipped with heavy machinery
that can apply compression and tensile loads to
the structure many times in combination with exposure to an external environment.
Characterization of cables and cable bundles from small to large scale is accomplished through testing and modelling.
The reliability of electrical cables, i.e. subsea cables, is of great
importance and the failure of the cable does not just imply interrupted power production but also immediate economic impact. Therefore, a great endurance, especially at high flexural, torsional and axial loads , to ensure the service life and compatibility with the rest of the system is required.

Testing of cables and harness components
We perform type tests of cables and evaluation of cable materials according to corporate standards and national and international standards.

Examples of analyzes that we perform:
• Tensile tests and compressive tests in various temperatures
• Abrasion tests
• Impact tests
• Winding tests
• Durability in heat/moisture and different chemicals
• Strip force
• UV resistance
• Ozone resistance
• Electrical characteristics
• Mycological tests

We perform evaluations of cables, tapes, protective hoses and other components for harnesses dedicated for private cars, trucks, ships and railway.

Marking systems
We have developed a method for testing of marking sleeves. The method includes evaluation of durability, chemical resistance and mechanical properties.
The method is also applicable for testing of other marking systems for cables.

Heating cables
Certain types of heating cables are used for frost protection inside tap water pipes. To avoid health problems, it is important that no changes are made in approved cable sheath materials. We perform regular supervisory controls on sheath material composition.

We take active part in national Swedish as well as international standardization in the automotive cable field. By doing this we are in constant contact with car and cable manufacturers’ worldwide. It also enables us to use novel test methods immediately after publication.




Related Information


See also

Polymer TechnologyCable fire testing and research

Contact Persons

Low voltage and automotive cables
Anneli Buren

Phone: +46 10 516 53 55

High voltage cables
Tatu Nieminen

Phone: +46 10 516 57 75

Cable fire testing
Mechanical performance of cables
Tom Lindström

Phone: +46 10 516 53 50

RISE Research Institutes of Sweden, Phone 010-516 50 00, E-mail

The RISE institutes SP, Innventia and Swedish ICT have merged in order to become a stronger research and innovation partner for businesses and society.
During 2017 will be one of several websites within RISE. Please visit for more information about RISE.