Limträbalkar är bärande element i t.ex. träbroar. I dessa balkar bildas ofta sprickor i ytskiktet och sprickorna tillväxer mer eller mindre p.g.a. vädrets variation när ytskiktet blir utsatt för fuktupptagning, torkning, solljus, vind, regn etc. Inverkan av dessa sprickor på balkarnas lastbärande förmåga är obetydlig så länge sprickorna är små men det är viktigt att kunna mäta sprickorna och uppskatta hur de kommer att utvecklas. Sedan 2007 har ett antal limträbalkar varit uppställda utomhus på en provgård vid Martinsons anläggning i Bygdsiljum. Under minst fem år kommer storlek och lägen på sprickor i balkarna att mätas med bladmått och måttband vid ett antal tillfällen.
Målet med examensarbetet är att utveckla metod för att använda bildbehandling för utvärdering av sprickbildning i limträbalkar. Syftet är att undersöka om man kan komplettera eller eventuellt ersätta manuella mätningar med fotografering.
Du kommer att arbeta med följande:
• Litteraturstudie inom området.
• Metodutveckling för kamera, belysning och fixtur för positionering så att konstant ljussättning och kameraposition i utomhusmiljö säkerställs, samt för lagring/hantering av bilderna.
• Fotografering av balkarna på provgården.
• En stor del av arbetet består av bildbehandling för att hitta lämpliga filter etc för att kunna utvärdera fotona och sprickornas utveckling.
• Slutsatser om metodens lämplighet för dokumentation av balkars ytor, och om det är möjligt att mäta sprickornas position och storlek från bilderna i stället för direkt på balkarna och vilken information som eventuellt går förlorad.
• Skriftlig och muntlig rapport.
En del av tiden kommer att ägnas åt praktiskt arbete med utrustning och fotografering. Automatisering av bildhantering och bildbehandling utgör sedan huvuddelen av arbetet för att hitta metoder att utvärdera alla foton.
Lämplig utbildningsbakgrund är civilingenjörsutbildning eller magisterutbildning inom maskinteknik, träteknik, mätteknik, teknisk fysik eller annan likvärdig utbildning. Personen bör ha intresse för mätteknik och bildbehandling.
Stationeringsort är Skellefteå, antingen hos LTU (Luleå tekniska universitet) eller hos SP Trä. Stipendieersättning utgår.
Är du intresserad kontakta Karin Öhman Sandberg eller Anna Pousette.
Development of methods of photography and image processing of cracks in glulam beams
Glulam beams are structural elements in for example wooden bridges. The beams often get cracks in the surface and the cracks grow more or less due weather variation in the surface layer being subjected to moisture absorption, drying, sunlight, wind, rain, etc. The influence of these cracks on the load-bearing capacity is insignificant as long as the cracks are small, but it is important to measure the cracks and estimate how they will evolve. In 2007 a number of glulam beams were set out in a test field at Martinsons in Bygdsiljum. During five years, the size and locations of cracks in the beams will be measured with gauges and measuring tape.
The goal of the project is to develop methods for using photos and image processing for evaluation of cracking in laminated wood beams. The aim is to investigate if this method can supplement or possibly replace manual measurements.
You will work with the following:
• Literature study.
• Developing methods for camera, lighting and fixture for positioning so that constant lighting and camera position in the outdoor environment is ensured, and for the storage/handling of the images.
• Photography of the beams in the test field.
• Much of the work consists of image processing to find the appropriate filters, etc to evaluate the photos and cracks development.
• Conclusions on the suitability of the method for documenting surfaces of wooden beams, and if it is possible to measure the position and size of cracks on images instead of directly on the beams and what information might be lost.
• Written and oral report.
Some of the time will be devoted to practical work with equipment and photography. Automation of image management and image processing is then most of the work to find methods to evaluate all the photos.
Suitable educational background is engineering or Master's program in mechanical engineering, wood technology, measurement technology, engineering physics or equivalent training. The person should have an interest in measuring technology and image processing.
Location is Skellefteå, either at LTU (Luleå University of Technology) or at SP Wood Technology. Scholarship Compensation is paid.
If you are interested please contact Karin Öhman Sandberg or Anna Pousette.